DIGITAL THERMOMETER DEGREES 1000 ° C ATR144 DIGITAL SENSOR REGULATOR PID 24-220V

Description

ATR144 REPLACE ATR142
The ATR144 regulator is the recent Blue line release of the 32x74 format that integrates the new standards of the ATR range introduced with ATR244. It stands out for its high-performance display that guarantees excellent readability and increases the usable information for the operator in addition to a useful scrolling Help function.

The programming mode with NFC / RFID technology is introduced through the MyPixsys App (already available in the range of converters, STR indicators and MCM260X modules), which allows programming even in the field and on the move without the need for wiring or power supply.

The serial communication option is in RS485 with Modbus RTU / Slave protocol, in combination with the EasyLog device it is possible to store in Excel format and send with MQTT / FTP protocols.

Useful power supply with extended range from 24 to 230V AC / DC with galvanic isolation from the mains.

ATR144-ABC1 analog input + 2 relays 5 A + 1 D.I / O - Power supply 24..230 V AC / DC
General features
Container 32 x 74 (front) x 53 mm
Power supply 24..230 V AC / DC ± 15% 50/60 Hz - galvanic isolation 2,5KV
Consumption5 VA
Display White 4-digit 0.38 "+ red 5-digit 0.28" display
Environmental conditions Temperature 0-45 ° C, humidity 35..95 RH%
Material Container: self-extinguishing UL94V2 PC. Front: PC UL94V2
Weight Approx. 120 g
Protection Front panel: IP65 (with gasket). Container and terminals: IP20
Quick configuration Memory Card, LABSOFTVIEW software, EASY-UP codes
APP / NFC Programming via APP (NFC) for Android devices
Entrances
1 analog configurable Res. 16bit, selection between Thermocouples K, S, R, J, T, N, B (automatic compensation of the cold junction-25..85 ° C, ± 0.2% FS ± 1 digit FS), PT100, PT500, PT1000 thermoresistances , Ni100, PTC1K, NTC10K (ß 3435K), process signals 0..10 V (50000 points), 0 / 4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KO (50000 points)
Acquisition time Programmable up to 2.1 ms (frequency up to 470 Hz)
1/2 Digital Setpoint change, Hold, Run, Start of Tuning, Start / Stop, configuration lock
Go out
1/2 Relay 5 A - 250 V AC resistive load
1 SSR12 V DC - 25 mA max
Serial communication RS485 Modbus RTU - Slave (4800..115200 baud) Code "-T"
Software Features
Regulation algorithms ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional,
Tuning Manual or automatic
Protections Control / alarm setpoints - Password to access the parameters
Alarm mode Absolute / Threshold, band, upper and lower deviation. Alarms with hold and activation delay. Loop Break Alarm function.
Double action Combined hot-cold operation with double P.I.D.
Soft-Start Setting of the rising gradient in Degrees / Hour or fixed output percentage
Open / Close logic Motorized valves control